$595.00

Product Dimensions:  16" long x 6-5/8" high x 2-5/8" deep

FEATURES OF THIS MODEL

Displays
Four 2.3-inch digits show interval time count in minutes/seconds and time-of-day in hours/minutes.  Small digits show minutes remaining in the interval or seconds while in time-of-day.

Time On-Scene
Provides users with the current total amount of time on-scene.  Feature meets the requirements in NFPA 1500 chapters 8.2.4 and 8.2.4.1.

8.2.4 - The fire department communications center shall start an incident clock when the first arrriving unit is on-scene of a working structure fire or hazardous matterials incident, or when other conditions appear to be time sensitive or dangerous.

8.2.4.1 - The dispatch center shall notify the incident commander at every 10-minute increment with the time that resources have been on the incident until the fire is knocked down or the incident becomes static.

Programming
Programs are entered in minutes and seconds. The allowable range for each interval is 1 second to 99 minutes 59 seconds.  Each program may include up to 19 intervals and each interval may be repeated up to 99 times.  The entire program can also be repeated a specific number of times or the program can be set on continuous repeat until manually stopped.

Data In/Out
Data connectors on the control panel are used to connect multiple units which will repeat the display being show on on the first unit.  Data is transmitted in binary form.

Program Review
The loaded program can be reveiwed by pressing the REPEAT key.

Horn
A connection for an accessory horn is located on the control panel.

Memory
Three programs can be stored for instant recall.

Count Direction
Counts UP.  Rolls over to 0 at 99 minutes 59 seconds.

Run Indication
The seconds count on the small digits acts as  an indicator to show that the unit is running.

Time of Day
Displayed by pressing the CLEAR ENTRY or EXIT key, or the unit will rever to time-of-day if left idle for ten minutes.

CUSTOMER CONFIGURABLE

Time-of-Day
The time-of-day mode may be set to 12 or 24 hour time.

Horn
The horn may be set to "ON" (sounds at beginning of each interval), "END" (of program), or "OFF".

Warranty
One-year Limited Warranty

Product Documentation
Operating Manual

INCLUDED ACCESSORIES

Interval Timer IR Remote Control - Part Number 8000-0010 - Standard
Range up to 40 feet.  One controller is included with all Interval Timer models (except model CC8152-T16).  Additional Interval Timer IR Remote Control units are recommended for spares and situations where multiple people are using the unit and do not want to share the controller.

Interval Timer IR Remote Control - Part Number 8000-0013 - Dedicated
Dedicated IR Remote Control unit for actuating two incident clocks (CC8152-29 and CC8152-T30) for simultaneous use.  START and STOP functions only.

Power Adapter for all Timers, Counters and Horns - Part Number 8000-2000
Power adapter (110-240VAC/12VDC, 1.5A) for 8000 series Timers, Counters and Horns.  International orders will be prompted for country where the equipment will be used so that the correct charger and plug configuration is supplied.  Standard power adapter cable is 8-feet long.  Longer cable lengths are available upon request.  Email chronomix.sales@chronomix.com or call 925-215-4685.

OPTIONAL ACCESSORIES

Interval Timer IR Remote Control - Part Number 8000-0010 - Standard
For Interval Timers only.  Range up to 40 feet.  One controller is included with all Interval Timer models (except model CC8152-T16).  Additional Interval Timer IR Remote Control units are recommended for spares and situations where multiple people are using the unit and do not want to share the controller.  Add this accessory to your shopping cart if you need a replacement unit or a spare.

Blaster Horn - Part Number 8000-1000
120-decibel tone horn for increasing the sound available from Interval and Alarm timers.  Plugs into the receptacle on the control panel of the Interval Timer Series.  Requires separate Power Adapter Part Number 8000-2000 (included with horn model).  Power Adapter cable is 8-feet long.  Note:  Longer cable lengths can be provided.  Charge is based on length of cable and cost of change.  Email chronomix.sales@chronomix.com or call 925-215-4685.

Wall Holder for Interval Timers and Counters - Part Number 8000-8225
Wall Holder holds Interval Timers and Counters securely on the wall without requiring the use of fasteners.  Units can be easily moved back and forth between several locations with the Wall Holder providing security against being dropped.  Suggest placing a Wall Holder at each location where the unit is used regularly.