Specifications of the CC737 Compusport Printing Timer:
Time Base and Accuracy:
The time base is a custom quartz crystal, manufactured to operate within a tolerance of 10 ppm at 70 degrees F., which is equivalent to a maximum variance of .036 seconds per hour or, .864 seconds in 24 hours. NIST traceable certificate of calibration can be provided.
Timing Resolution:
Time resolution to .001 seconds; time range to 99 hours, 59 minutes, 59.999 seconds.
Time Preset:
Allows any preset time to 99 hours, 59 minutes, 59 seconds to be entered into the timer through the panel keyboard.
Operating Temperature:
32F to 110F (0C to 45C).
Dimensions & Weight:
13.5" long x 7" high x 12" deep; 11 lbs.
Construction:
Self-contained in an impact resistant custom molded high density polyethylene transit case; removable lid; luggage-type handle; dust-sealed aluminum valance; rugged hardware.
Printer:
Citizen 40 column dot matrix printer; alphanumeric characters; prints on 2.3/4" wide plain white paper rolls; two color ink ribbon; printing speed to 1.5 lines per second; printer can be turned off to replace paper during timing event.
Printout:
Cross Country Mode:
Channel/chute number, place within channel, overall place, cumulative finish time.
Subtracted Splits Mode:
Channel number, lap/place number, lap time, cumulative time.
Optional:
When the Select Timing Keypad is used the information entered is printed in red.
Place Count:
Overall, records to 9,999 and continues from zero; within channel records to 999 and continues from zero.
Memory:
10,000 times held in internal memory. May be reprinted or downloaded after race.
Built-In Display (LCD):
16 character alphanumeric liquid crystal display shows information entered into the timer through the panel keyboard: timing mode, preset time, reset, etc. After timer start, LCD shows the timing mode, place count and elapsed running time.
Computer (Data) Output:
RS-232 compatible serial interface; baud rate 9600.
Internal Battery Capacity:
Rechargeable NiCad batteries; capacity to print 1000 lines after 24 hours of running time; will print at least 15000 lines on full charge.
External Power Options:
12 - 16 volts AC or DC at 0.25 amps maximum; 115VAC to 12VAC battery charger included; 12VDC power cables optional. International voltages and plug styles are also available.
Specifications of the CT200 & CT600 Printing Timers:
Time Base and Accuracy:
The time base is a custom quartz crystal, manufactured to operate within a tolerance of 10 ppm at 70 degrees F., which is equivalent to a maximum variance of .036 seconds per hour or, .864 seconds in 24 hours. NIST traceable certificate of calibration can be provided.
Timing Resolution:
Time resolution to .001 seconds; time range to 99 hours, 59 minutes, 59.999 seconds.
Operating Temperature:
32F to 110F (0C to 45C).
Dimensions & Weight:
18" long x 7" high x 14" deep; 11 lbs.
Construction:
Self-contained in an impact resistant custom molded high density polyethylene transit case; removable lid; luggage-type handle; dust-sealed aluminum valance; rugged hardware.
Printer:
Citizen 40 column dot matrix printer; alphanumeric characters; prints on 2.3/4" wide plain white paper rolls; two color ink ribbon; printing speed to 1.5 lines per second; printer can be turned off to replace paper during timing event.
Printout:
Car number, lap number, lap (subtracted split) time; cumulative (elapsed) time.
Memory:
99 times per car maintained until timing session is completed and printed.
Built-In Display (LCD):
16 character alphanumeric liquid crystal display shows information entered into the timer through the panel keyboard: timing mode, preset time, reset, etc. After timer start, LCD shows the timing mode, place count and elapsed running time.
Computer (Data) Output:
RS-232 compatible serial interface; baud rate 9600.
Internal Battery Capacity:
Rechargeable NiCad batteries; capacity to print 1000 lines after 24 hours of running time; will print at least 15000 lines on full charge.
External Power Options:
12 volts AC or DC at 0.25 amps maximum; 115VAC to 12VAC battery charger included; 12VDC power cables optional. International voltages and plug styles are also available.